5-Fluorocytosine (5-FC) CAS 2022-85-7 Purity ≥99.5% (HPLC) Capecitabine Emtricitabine Intermediate Factory

Short Description:

Chemical Name: 5-Fluorocytosine; 5-FC

CAS: 2022-85-7

Appearance: White or Almost White Crystalline Powder 

Purity: ≥99.5% (HPLC) 

Intermediate of Capecitabine (CAS: 154361-50-9) & Emtricitabine (CAS: 143491-57-0)

High Quality, Commercial Production 

Inquiry: alvin@ruifuchem.com


Product Detail

Related Products

Product Tags

Description:

Commercial Supply Capecitabine Related Intermediates:
5-Fluorocytosine CAS: 2022-85-7
2',3'-Di-O-acetyl-5'-deoxy-5-fluorocytidine CAS: 161599-46-8
1,2,3-Tri-O-acetyl-5-deoxy-β-D-ribofuranose CAS: 62211-93-2
Capecitabine CAS: 154361-50-9 

Chemical Properties:

Name 5-Fluorocytosine
Synonyms 5-FC; Flucytosine; 4-Amino-5-fluoro-2-hydroxypyrimidine 
CAS Number 2022-85-7
CAT Number RF-PI175
Stock Status In Stock, Production Scale Up to Tons
Molecular Formula C4H4FN3O
Molecular Weight 129.09
Brand Ruifu Chemical

Specifications:

Item Specifications
Appearance White or Almost White Crystalline Powder 
Identification IR The infrared absorption spectrum of the sample must be concordant with the standard spectrum
Purity / Analysis Method ≥99.5% (HPLC)
Cytosine ≤0.10%
Any Other Individual Impurity ≤0.10%
Solubility Sparingly Soluble in Water; Slight Soluble in Alcohol; Paractically in Chloroform and in Ether
Loss on Drying ≤1.5% w/w (at 105℃ 4 h)
Residue on Ignition ≤0.10% w/w
Heavy Metals (Pb) ≤20ppm
Fluorinc ≤500ppm
5-Fluorouracil ≤0.10%
Assay 98.5%~101.0% (calculated on the dried basis)
Test Standard Enterprise Standard
Usage Capecitabine & Emtricitabine Intermediate; Pharmaceutical Intermediates
Upstream Product  Cytosine CAS: 71-30-7

5-Fluorocytosine (5-FC) CAS: 2022-85-7 Analysis Method
Appearance-White or Almost White Crystalline Powder
Loss on Drying-Dry it at 105 for 4 hours: it loses not more than 1.50% of its weight.
Residue on Ignition-not more than 0.1%.
Heavy Metals-not more than 0.002%.
Fluoride-Mix 70 mL of freshly prepared saturated potassium chloride solution with 30 mL of isopropyl alcohol, fill the electrode with the clear supernatant, and allow the electrode to remain in the mixture for not less than 2 hours prior to use, or preferably overnight.
When taking the measurements, transfer the solution to a 150-mL beaker, and immerse the electrodes. Insert a polytef-coated stirring bar into the beaker, place the beaker on a magnetic stirrer having an insulated top, and allow to stir until equilibrium is attained (about 1 to 2 minutes). Rinse and dry the electrodes between measurements, taking care not to scratch the crystal in the specific ion electrode.
Measure the potential of each Standard preparation, and plot the fluoride concentration, in mg per 100 mL, versus the potential, in mV, on semilogarithmic paper. Measure the potential of the Test preparation, and determine from the standard curve the fluoride concentration, in mg per 100 mL. Calculate the percentage of fluoride in the portion of Flucytosine taken by the formula:
C / 10
in which C is the fluoride concentration, in mg per 100 mL, from the standard curve: not more than 0.05% of fluoride is found.
Fluorouracil-Dissolve 250 mg in 10 mL of a mixture of glacial acetic acid and water (4:1). Apply 20 µL of this solution to a thin-layer chromatographic plate coated with a 0.5-mm layer of chromatographic silica gel mixture. To the same plate apply 20 µL, in 10-µL increments, of a 0.025 mg per mL solution of USP Fluorouracil RS in a mixture of glacial acetic acid and water (4:1). Develop the chromatogram in a mixture of chloroform and glacial acetic acid (13:7) until the solvent front has moved not less than 14 cm from the origin. Remove the plate from the developing chamber, and allow the solvent to evaporate. Locate the spots on the plate by observing under short-wavelength UV radiation: any spot from the solution under test is not greater in size and intensity than the spot at the respective RF produced by the Standard solution, corresponding to not more than 0.1% of fluorouracil.
Assay-Place about 400 mg of Flucytosine, accurately weighed, in a 250-mL beaker, add 150 mL of a mixture of 2 volumes of glacial acetic acid and 1 volume of acetic anhydride, and dissolve, warming gently if necessary. Titrate potentiometrically with 0.1 N perchloric acid VS, using a calomel-glass electrode system. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N perchloric acid is equivalent to 12.91 mg of C4H4FN3O. Flucytosine contains not less than 98.5 percent and not more than 101.0 percent of C4H4FN3O, calculated on the dried basis.

Package & Storage:

Package: Bottle, Aluminum foil bag, Cardboard drum, 25kg/Drum, or according to customer's requirement.

Storage Condition: Store in sealed containers at cool and dry place; Protect from light, moisture and pest infestation.

Advantages:

1

FAQ:

Application:

Shanghai Ruifu Chemical Co., Ltd. is the leading manufacturer and supplier of 5-Fluorocytosine CAS: 2022-85-7 (Fluorocytosine; 5-FC) with high quality, widely used in organic synthesis, synthesis of pharmaceutical intermediates and Active Pharmaceutical Ingredient (API) synthesis. 5-Fluorocytosine (CAS: 2022-85-7) is the intermediate of Capecitabine (CAS: 154361-50-9) and Emtricitabine (CAS: 143491-57-0).

5-Fluorocytosine is a fluorinated analog of cytosine. 5-FC is approved by the U.S. Food and Drug Administration (FDA) as an antifungal agent used for the treatment of Candida and Cryptococcus. Lately with the development of gene therapy, 5-FC has been introduced as a prodrug in combination with the cytosine deaminase suicide gene. 

  • Write your message here and send it to us